For durability and trouble-free service pumping equipment required to comply with the mandatory conditions for its proper use – the use of the pump to work with a certain liquid chemical and physical composition. Taco 0013 pumps used for pumping water, the content of abrasive and fiber components which must be within the limits specified [...]
Tags: PEX Plumbing
As in countries with milder climates, Taco 007 pumps in Canada such as “ground-water able to fully meet the needs of individual house in the warmth. Mode operation of Taco 007 pump installation without an additional source of heat is called monovalent. Typically, the Taco 007 pump is equipped with a built-in household power back-up [...]
Tags: Canada, Taco 007, Taco 007 pump, Taco 007 Pumps
The economic impact depends, of course, and the cost of reconstruction. Therefore, in Seattle, as everywhere, all the more widespread so-called trenchless repair technology tubingline. It is believed that the cost of such technology does not exceed 30-35% of the cost of relaying of worn-out tubing. We can assume that among these technologies is the [...]
The materials out of which the connecting pipe and PEX fittings: PVC (polyvinyl chloride) – from the produce disc valves, diaphragm and Taco mixing valves, filters, Taco heating valves. Possible Temperature – 0-60C, the pressure in the pipes made of PVC can be up to 16 bar. PVC pipe is well resistant to chemicals. PEX [...]
Tags: PEX Fittings, pex pipe
An alternative direction to create competition manufacture of steel pipe – output of PVC fittings and valves. New PVC fittings used in Germany back in 1930, and since that time, gradually developing in the technological direction, plastic replaces metal. Available in PVC fittings of various types and purposes of maintaining high standards of quality. PEX [...]
Tags: PEX, pex pipe, PEX Tubing, plumbing, Plumbing supplies, polyvinyl chloride
In addition to ultraviolet radiation and the action of microorganisms, there are other factors that cause degradation of polymers. Although most polymers are slowly reacts with oxygen, elevated temperatures and ultraviolet radiation can strongly accelerate the oxidation processes. Water has a relatively weak negative effect. Nevertheless, there are three different effects associated with the influence [...]
Tags: heat, moisture, Oxygen, PEX plastics, Testing
