Posts Tagged ‘PEX Tubing’

Few examples of tubing for Radiant Heat

Polyethylene (PE) Polyethylene (PE) pressure used for internal and external pressure pipelines. Pipes meet the requirements for installation and operation of the pipes in winter conditions. PE pipe outside diameter from 20 to 63 mm combined with PEX or brass fittings with rubber O-ring, as well as using electric couplings. Pipe diameters from 63 mm [...]

Tags: , , ,

Basic Materials for expansion Systems

Any expansion system has two main tasks: 1) obtaining the desired final pressure pumped into the facility; 2) the possibility of obtaining the required effective pumping speed of the object. These tasks can only be provided if there is sufficient integrity of materials, there is no separation of gases or vapors inside the expansion system [...]

Tags: ,

PEX tubing for big Radiant Floor Heating project

Padding-situ concrete is produced with the help of forms, and seal by a vibrator. Particular attention should be given to applying the concrete in the trench. In order not to segregate the concrete mixture, its descent into the trench must meet the following requirements: – The height of free drop of concrete mix into the [...]

Tags: ,

PEX tubing for small radiant heating projects

PEX tubing is common for small radiant heating projects, since it’s the most flexible barrier type PEX size. Areas of the house such as kitchens and bathrooms require the smallest possible floor elevation and maximum heat distribution, since tile and ceramics are good heat conductors. Because the OD of the 3/8″ barrier PEX is 1/2″, [...]

Tags: , ,

Insulating layer overlapping an isolated part of the PEX tubing

Wrap PEX tubing pipe waterproofing done environmentally after the imposition of coating before curing. This will provide good adhesion to the coil coating. Waterproofing in the form of tape width of 50 cm wound on the PEX tubing in a spiral with overlapping seams by 1-2 cm should be borne by wrapping the PEX tubing [...]

Tags:

PEX tubing 3/8 1000 feet application

Product Description: 1000ft roll of 3/8″ PEX Tubing with Oxygen Barrier for use in radiant heating systems. This product meets/exceeds ASTM F876/877, CSA B137.5, DIN 4726 standards and backed by a 25 year manufacturer warranty. Certified for use in radiant floor heating applications. UPC listed by IAPMO. PPI pressure rated at: 79psi @ 200F, 100psi [...]

Tags: